If your home has storm windows, make sure they are closed properly during the heating season.
Install weather exhaust on doors and seals around windows and door frames. Attach sturdy, clear plastic or film glass to the inside of the window frames during the cold winter months. Make sure the plastic is attached to the frame. Install waterproof, insulating curtains or screens on windows that feel cluttered. If you have a sliding door, be sure to keep the strip clean. A dirty runway can damage a door seal and create space for hot or cold air to escape. Seal around the door or wind door with glue for weather strips. Place a rigid foam insulation on the back of the door. Prefabricated insulated attic stairs are also available from household centers. Pipeline, electricity and wiring in exterior walls.
Save money with more powerful electronics
chasing open spaces is a breeze spaces between interior and exterior walls and the roof panel around a metal plate, including between interior and exterior walls, and where the damper is sealed to the subfloor floors, including cantilevered floors and strips in flooring systems knee walls in a coat bag mconnections to existing buildings and extensions or modular building f you have an unfinished basement or crawl space, check the foundation walls for air leakage by looking for a screen. If there is a network, there is a draft. Keep the chimney closed unless the fire is burning. Keeping the damper open is like keeping the window open in the winter – it allows warm air to get out of the chimney. If you never use your fireplace, plug it in and close it. Remove air conditioners from windows during the cold months to reduce drafts. If this is not possible, cover the inside and outside of the unit with plastic.
Make the most of your lighting
Replace them with qualified lamps (LEDs). LED bulbs use up to 90 percent less energy than bulbs and last up to 25 times longer. Set the desired luminous flux (brightness), then select the lamp with the lowest wattage consumption (energy consumption). An old 60-watt lamp produces about 800 lumens, while a 100-watt lamp produces about 1,600 lumens. Use brighter lights in places where you take close-ups, such as reading, cooking, and home projects. Use less bright light elsewhere. The color of the light is measured on a temperature scale called Kelvin (K). The 2700-3000 K bulb produces the same warm, soft whites as a traditional bulb. The 3500 – 4100 K bulb is perfect for kitchens or workplaces. The 5000-6500 K bulb produces “natural” or “daylight” and is good for reading. Turn off the lights in any room you do not use. Use natural light when you can. Make the most of natural light by moving desks, reading chairs and desks closer to windows. Remember that lighter colors on walls, ceilings and floors reflect more sunlight. Keep bulbs and furniture away from dust and other particles. Clean bulbs provide more light than dirty bulbs. Using dimmers or three-way lamps can reduce energy consumption to the lowest possible effect and change the mood of the room. Choose ENERGY STAR-qualified decorative LED floodlights for your vacation. Many people will leave a light upstairs to make it look like someone is home when they are away. Instead, use a lighter only for a short period of time each night. This saves energy and gives a more realistic idea that someone is home. Install a motion sensor on the porch so you do not hold it indefinitely. Use it at home or outdoors.